2.5 tons effluent + 1 ton pressmud = 0. 5 ton of compost, 85% reduction in total Weight
TOP  


After 4 years of extensive R & D work, we have developed Automatic Effluent Dispenser System



                            We have developed a unique procedure, which will measure the maturity of the compost. Maturity of the compost indicates whether it is ready for application to the field. This is the most important test for effluent based composting.

                            It is easy to use this equipment. For trained person, it takes only l3 hours to conduct each trial.


NO FLIES, NO FOUL SMELL. ONLY GOOD NURSERY SMELL FROM 2ES COMPOST YARD


         2ES is an aerobic process. The decomposition occurring in the window takes up all the available oxygen. If there is no replacement of oxygen to the center of the compost windrow, anaerobic condition will set in. Anaerobic composting will reduce effluent evaporation as no heat will be developed.
STREAM COMING OUT OF WINDROWS AT TEMP. 60 – 650c



At the beginning due to the presence of oxygen aerobic composting will take place which in turn will develop heat. This heat will evaporate the water present in the middle and rise out from the top of the windrow like a chimney. If you watch any good compost windrow, stream will rise only from the top and not from the sides. Consequently fresh air will start flowing in from the sides. Hence natural aeration will set in.

PIONEER IN THE COMPOST TECHNOLOGY IN INDIA

Western Composting methods are largely for leaves, municipal waste and to some extent sewage sludge. Their technology is based on how to conserve the moisture and heat, in other words prevent evaporation. Whereas Press mud composting is done primarily to evaporate the liquid.

• In 1994 the first indigenously designed COMPOST MACHINE for Indian conditions.

 • In 1998 after 4 years of R&D the SPRAYING MACHINE Dispenser was invented.

 • In 2001 after evaluating 3 prototypes, WINDROW FORMING TROLLEY was invented.

 • In 2002 The compost Maturity test was developed.

We are continuing to make improvements on all the four products we have developed so far.

Manufacturing Expertise: Our compost machine is rugged and efficient. It requires minimum maintenance spare parts because it is built around standard automobile modules available readily in the market like Mahindra tractor, which has all international Quality Certification. Whatever components manufactured by us is made several times stronger so that they are unlikely to fail.

These machines were developed by Dr. V.Ravichandran Ph.D. (USA), worked in Ford Motor Co.USA, was faculty member in Univ. of Notre Dame USA, IIT Kanpur, IIT Madras. Has 8 inventions in the area of pollution control and process engineering to his credit.
 
Other equipments: Total oil removal systems – 100% oil removal,
no other equipment could give similar performance in the world.
Copyright © 2005 Enviro Energy Systems. - All rights reserved.
Website Designed And Powered By Pipalweb.com